RF LINKS VHF HIGH BAND TRANSMITTER MODULES

Transmitters
 
Five configurations of the High Band RF Link are available and each is identified by letter. Use this guide when reviewing specifications
 
Model number:
810-041, 0.4 watts (a)
810-038, 2.2 watts (b)
810-040, 4.0 watts (c)
816-011, 8.0 watts (d)
816-040, 25 watts (e)
 
Frequency range:
132-174 MHz
Frequency stability:
+/-.0005% (-30 degree to +60 degree C)
RF power output:
0.4 W @ 15 VDC (a)
2.2 W @ 15 VDC (b)
4.0 W @ 15 VDC (c)
8.0 W @ 12.5 VDC (d)
25.0 W @ 12.5 VDC (e)
Emission type:
15F2, 16F3
Power supply:
+15 VDC +/- 15%
Power supply current:
180 mA @ 15 VDC (a)
400 mA @ 15 VDC (b)
650 mA @ 15 VDC (c)
1.5 amps @ 12.5 VDC (d)
5 amps @ 12.5 VDC (e)
 
Audio input impedance:
5,000 ohms @ 1 kHz (a,b,c)
4,700 ohms @ 1 kHz (d,e)
 
Audio input level @ 1 kHz for +/-3.0 kHz deviation:
5-10 mV rms (a,b,c)
7 mV rms (d,e)
 
Audio response (300-3,000 Hz):
+1, -3 dB of std. EIA 6 dB/octave pre-emphasis characteristic
Audio distortion (maximum):
6% @ 60% rated system deviation with 1 kHz modulation
FM hum & noise:
50 dB below 60% rated system deviation
Spurious & harmonics:
43 dB below carrier (a)
47 dB below carrier (b)
49 dB below carrier (c)
55 dB below carrier (d)
63 dB below carrier (e)
 
Weight:
6 oz (170.1 gm) (a,b,c)
15 oz (425.25 gm) (d)
1 lb 4 oz (567.0 gm) (e)
 
Size:
3.32" x 3.32" x 1" (8.43 cm x 8.43 cm x 2.54 cm) (a,b,c)
4.1" x 4.6" x 1.5" (10.41 cm x 11.68 cm x 3.81 cm) (d)
8.18" x 4.75" x 1.75" (20.77 cm x 12.06 cm x 4.44 cm) (e)
Mounting centers:
2.9" x 2.9" (7.36 cm x 7.36 cm) (a,b,c)
3.6" x 4.1" (9.14 cm x 10.41 cm) (d)
4.25" x 6.68" (10.79 cm x 16.96 cm) (e)
 
Duty cycle w/o degradation
Continuous (a)
10% (max. trans. one minute) (b,c,d,e)
|

Specifications subject to change without notice. We strongly recommend checking out anti-glare glasses from Ambr

Home | Products | The Company | Contact ARS |